FerLop
-
Posts
137 -
Joined
-
Last visited
Content Type
Profiles
Blogs
Forums
Gallery
Pipeline Tools
3D Wiki
Plugin List
Store
Downloads
Everything posted by FerLop
-
thank you so much for your help! i must see exactly wich parameter does, in fact for now i don't have an image to make, just i try to understand how C4D works, i have an ebook and videos lessons to understand. I see that there are Cinevercity . there is a lot of course...
-
Hello! thanks for the explain! i try again to random rotate but in effector don't work, can you see it ? Thanks you ! have a nice day ! sorry, i must look well to reproduce, thanks --- i don't find Quantize in Mograph --> Effecteur coordonnées et base de données_RE_delay_quantize_random_rotation.c4d 2022-09-15_12-31-30.mp4
-
Hello, I would like to rotate cubes as in the attached file, but I do not know the random module. (is it rnd or rmd?) I create this to move the cubes: num*200 for X and Y, I don’t know the use of random. thank you in advance! coordonnées et base de données.c4d
-
You took the time to make me a diagram, thank you very much, yes, indeed, no doubt, after turning the angle to 90°, the strength works! Good night! Take care!
-
Thank you very much, I felt like I cut it off but no, there was nothing. You’re right, I cut 11 times and now it’s spinning, the bend is working well... but I don’t know why the K-L doesn’t work there, it doesn’t want to do the loop across the extrusion, it only offers horizontal loops. Thanks again (so I took the knife line). K L 3.c4d
-
Hello, thank you so much for taking the time to help me despite my expression and the translator!! in fact it is the smaller and extruded part of the cube, the one that has the zone of action for the bend, in my house, this part is stiff, it does not want to bend, it remains rigid.Yet it seems to me that it has subdivisions so it should be twisted.The goal is just to follow a lesson, the goal is to master and know the tool (often 2 or 3 tools at the same time). Thank you for your time! 2022-09-08_17-27-45.mp4 K L 2.c4d
-
Hello, I follow the course of the crab in Cineversity but the claw of the crab instead of just moving, stretches as if I had extruded it. What mistakes did I make? Thank you in advance for your help!! 2022-09-08_17-15-17.mp4 crabe-1.c4d
-
Hello, I am trying to understand how to isolate and modify a part of the object and not the whole object. Here I took "incurvation" and I want to modify only the piece that takes root in the cube (has been extruded). So I "cut" with the K-L the base of the extrusion, then I cuddled the transofrmation only on the part that protrudes from the cube. But the behavior is not flexible, the curvature seems to work well when I change the angle, but in fact the modification is too rigid, I would like the transformation to be smooth and curved. Is that possible? Thank you in advance, I hope I was clear! Have a good evening! K L 2.c4d
-
Hello, following a course (R20) I am asked to do a turn on itself, but if I "do not crush" to have access to an object with its tags, I do not manage to create a twist otherwise. is it possible to make a twist with the original elements? Thank you in advance for your help! cloneur cube 1.c4d
-
Hello, I just saw (I don’t know if this is due to today’s update) I can with the tool "controlled extrusion" make appear the parts present and ignore the deleted segments. I could even reverse the points of an S and it works, it’s amazing!! thanks for your help!! 2022-08-26_07-45-55.mp4 essai.c4d
-
Hello, in fact I wanted a manual writing effect so use the percentage of "controlled extrusion" composed of a circle and the word I "cut out". Because to have an evolution from 0% to 100% of the text, for this it was necessary that the writing be inimtereue , but it is not beautiful, so I wanted to try by cutting the letters one by one. I hope I’ve been clear!! Sorry for the gibberish!
-
hello, I try to cut the word "try" and at the same time extrude it to give it thickness. But when I cut with the tool "cut the segment in the Spline menu"it seems to work as long as the object does not undergo "controlled extrusion" where the Spline loses all the cuts made before. Is this normal behaviour? Thank you for your support! essai.c4d
-
Ah it was simple in fact I had misunderstood the exercise: I did a selction per loop so a single line that goes all around the sphere, and so there is no matter on the other hand by selecting all the polygons of the halfsphere there it duplicates well the selection by U-P. Thanks again!! sphere coupee test.c4d
-
Hello, I am an "old" course, that is to say that the logos are not the same and there I am supposed to be able to cut the sphere in 2: I tried shift+D and U-P it did create additional icons in the list of objects. The problem is that they are "empty" there is the moving tool but no form. what are my mistakes? Thanks for your help in advance! sphere coupee.c4d
-
Hello, I want to go from a text to a shape with the tool "skin" but in fact the star does not want to connect to the text, so I tried to "bridge" from the edges of the text to the star but it does not work. Is it possible to do this? Does it necessarily take two splines to connect with the skin tool? if yes, how to transform the word TEXT into spline so that it fits the skin tool? Thanks for the info, I hope I was not too confused peau.c4d
-
Thank you, good you will see me often here! I will resume my basics, thank you for the details PSR (I did not understand), Take care of yourself!
-
Thanks for all this explanation, so C4D does not propose by default a model or models, it’s a shame, so you have to find a model elsewhere and import it with its own mesh, However, I will inquire but I understood that PSR was the formula to bring the object to the center of its parent. You need to talk about another property, I’ll try to find out how it works. I start a bit off wrong, at the same time I don’t know if there is an order... Thank you a thousand times for your help!!
-
i am sorry, so if i understand it's not possible ? Yes i read (translate google) but i thought that it was a posibilities in C4D to have a character by default ? Thank you
-
Here is what i see, thanks for all !!
-
Hello, I would like to know why the character does not appear, there are only parameters( I suppose)of arms and legs and trunk, but the contour of the character is empty, how to make it appear please? Thank you in advance!! superman-seeklogo1.c4d
-
Thank you very much for your help, actually I tried with After Effects via the pins that we attach to the joints and there it "works" about. But I wanted to try in C4D to have more realism, but that’s something else! I’ll try as you tell me with the camera and PSR transform. Big thanks again!!
-
Hello, I want to create a superman from the character of C4D but all the parameters in the properties are displayed but I don’t have the guy to change, what mistakes do I make? Thank you in advance for your help!! superman-seeklogo1.c4d
-
Sorry, I wonder why the extrusion does not work in this version (the other file it works) yet I did 1/ import AI and 2/ extrusion, thank you for your advice!! ASUS décomposé v4.c4d
-
Hello, thanks for the advice: I discovered one thing about keyframes that amazes me: when I first installed key, I am in object mode,and the small triangle to check to create the keyframe, at the set value. When I come back to this key I have another panel (see capture) in which I can change the value of the key, but I do not need to validate it on the triangle, changing directly, the change is applied and saved. Is this a new way to handle keyframes? It’s like there’s a keyframe manager, so to speak. Thank you in advance for your help!!!
-
Hello, i try another time but i don't know what i do wrong. The time to calculate is very high, the first time i changes the number was good, but when i change a second time it's the same value in/out, i hope you have time to see it, thanks !! Sans titre 2.c4d